Magnaflow

Due to California's Catalytic Converter regulations, we cannot sell such items to residents of California. Sorry for the inconvenience!

1. Car Sound converters have a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gasses and they hold the ceramic catalyst in proper alignment.

2. Car Sound converters have a 1/2” lap-joint where the necks meet the body. The neck does not extend into the converter body where it could hamper exhaust flow. This is the strongest and smoothest flowing inlet/outlet joint of any manufacturer.

3. We maintain separate dies on different sized inlets. We don’t skimp by putting larger neck sizes on smaller bodies. This would reduce the flow of the converter and reduce the quality of our product.

4. Car Sound uses a monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. An improper coating could result in flow restrictions or an emission test failure.

5. Car Sound uses a heavier gauge stainless steel, tip to tip. Others use mixed weights and materials.

6. Car Sound converters are seam welded close to the converter body for a strong, tight bond. We don’t weld along the edge which could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around.

7. Car Sound installs a factory capped, 90 degree air tube on “with air” converters. This saves time during installation. There is no need for additional labor to weld on an air tube or to create a bend when only an air tube stub is provided.

8. Car Sound uses an aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.

There are 2016 price increases effective immediately. Please call for details.

Errors and omissions expected while website is in development.